by T Burghart » Thu Jul 29, 2010 7:40 am
Hello all,
The new HDS 6200 is similar to the Z+F IMAGER 5006h.
It is possible to do an upgrade from the IMGAGER 5006/HDS 6000 to IMAGER 5006h/HDS 6200.
It is also possible to do the upgrade from IMAGER 5006i/HDS 6100 to IMAGER 5006h/HDS6200.
For prices please contact your local support or sales unit.
The specs that has changed are the measurement rate and the scanning speed.
With the IMAGER 5006h/HDS 6200 you have five resolutions with three scanning speed (quality) solutions.
It was built for profile scanning for kinematic use. With the higher measurement rate you get more points in less time.
The new resolution and scan speed is listed in the following table:
Resolution Pixel/360° High spped 50 rps Normal speed 25 rps High speed 12,5 rps
(data rate / scan time) (data rate / scan time) (data rate / scan time)
Preview 1 250 62 500 / 13 sec 31 250 / 25 sec 15 600 / 1 min
Low 2 500 125 000 / 25 sec 62 500 / 1 min 31 250 / 2 min
Middle 5 000 250 000 / 1 min 125 000 / 2 min 62 500 / 3 min
High 10 000 500 000 / 2 min 250 000 / 3 min 125 000 / 7 min
Superhigh 20 000 1 000 000 / 3 min 500 000 / 7 min 250 000 / 13 min
Ultrahigh 40 000 ------ 1 000 000 / 13 min 500 000 / 26 min
Regards
Thorsten